Steering Wheel Quick Release Type 1-A
All metal construction extend 1 inch has 10 splines, has 2 sets of bolt pattern upper and lower, for both Momo and Sparco. Horn is
usable.         
$100.
Steering Wheel Quick Release Type 1-B
All metal construction extend 1 inch has 16 splines, has 2 sets of bolt pattern upper and lower, for both Momo and Sparco. Horn is usable.
$100
Steering Wheel Quick Release Type -2
universal ball bearing quick release kit for any cars equipped with MOMO, SPARCO or NARDI hubs. Ball bearing swivel mechanism, slide
the steering wheel onto the hub and swivel the steering wheel will lock itself into place the same position you took the steering wheel off (goes
on one way). Kit also act as a 2 1/2inches spacer by pulling the steering wheel towards the driver, comes with wires to hook up horn button
with the grounding plates from the existing steering wheel hub. In addition, the kit act as anti-theft mechanism where most thefts will be
discouraged in stealing the car without a steering wheel!
$100
Steering Wheel Quick Release Type -3
THIS STEERING WHEEL QUICK RELEASE KIT CAN ADAPT ALL TYPE OF STEERING WHEELS WITH AFTER MARKET HUB LIKE MOMO, PERSONAL AND
SPARCO,THE HORN IS USABLE. EASILY INSTALL, ANTI-THREFT (TAKE THE STEERING WHEEL WITH YOU) THE BOLT PATTERNED IS UNIVERSAL. MIX
DIFFERENT MAKES OF STEERING WHEELS AND HUBS.WITH THE LOCKING DEVICE THE STEERING WHEEL IS SECURE IN PLACE. JUST PULL UP THE COLLAR
AND GO.   $150
Steering Wheel NEW no BOX
$75 Each
The quick release I don't like, has lots of play.